B-11.02 Installs ground fault protection and detection systems +8309A · Electrician · English

Covers determining, mounting, terminating, setting parameters and testing of ground fault protection and detection systems.

• ✓determine type of ground fault system required
• ✓select tools and equipment
• ✓position and mount ground fault system components
• ✓terminate and interconnect ground fault system components
• ✓set parameters for ground fault systems
• ✓test operation of ground fault system

Covers ground fault system types, purpose, codes, drawings and component selection considerations.

• ✓identify types of ground fault systems
• ✓explain purpose of ground fault systems
• ✓interpret codes and regulations pertaining to ground fault systems
• ✓interpret information found on drawings and specifications
• ✓identify considerations for selecting ground fault system components

Covers tools, equipment and procedures for installing ground fault systems and components.

• ✓identify tools and equipment used to install ground fault system
• ✓describe procedures to install ground fault systems and components

Covers the skills to select, install, terminate and remove conductors, cables and their components according to codes and specifications.

• ✓determine installation requirements, and select conductors, cables and conductor and cable components
• ✓select tools and equipment
• ✓mount, support and install conductors, cables, and conductor and cable components
• ✓measure and cut conductors and cables
• ✓prepare conductors and cables for termination
• ✓terminate conductors and cables
• ✓complete documentation to reflect changes
• ✓determine requirements for removal of existing conductors, cables, connectors and supports
• ✓remove conductors, cables, connectors and supports when replacing, and update documentation

Covers knowledge of conductor and cable types, characteristics, applications, codes and selection/removal considerations.

• ✓identify types of conductors, cables, and conductor and cable components, and describe their characteristics and applications
• ✓interpret codes, regulations and standards pertaining to conductors and cables
• ✓interpret information pertaining to conductors and cables found on drawings and specifications
• ✓identify considerations and requirements for removal of conductors, cables, and conductor and cable components
• ✓identify considerations and requirements for selecting conductors, cables, and conductor and cable components

Covers knowledge of tools, equipment and procedures to remove, prepare, install and terminate conductors, cables and components.

• ✓identify tools and equipment used to remove or install conductors, cables and conductor and cable components, and describe their applications and procedures for use
• ✓describe procedures to remove conductors, cables and conductor and cable components
• ✓describe procedures to prepare and install conductors, cables and conductor and cable components
• ✓describe procedures to terminate conductors and cables

Covers determining the type of security and surveillance system per drawings, specifications and job requirements.

Covers selecting tools and equipment according to the task.

Covers removing and disposing of existing components in an environmentally conscious manner and updating documentation.

Covers determining system layout per architectural and client requirements.

Covers selecting components per drawings, specifications, and job and client requirements.

Covers positioning, mounting and assembling components in locations per drawings, specifications, and job and client requirements.

Covers terminating and interconnecting components and associated system devices per drawings, specifications and job requirements.

Covers programming and configuring the system per job and client requirements and manufacturers' specifications.

Covers testing continuity and polarity of video data wiring using diagnostic equipment to confirm components function.

Covers verifying conductors have no opens and all components are bonded to ground and clear of obstructions.

Covers performing sensory, spot and system tests per drawings and specifications.

Covers activating devices to trigger events and associated systems' responses.

Covers demonstrating knowledge of security and surveillance systems, components, associated systems, characteristics, applications and operation.

• ✓interpret codes and regulations pertaining to security and surveillance systems
• ✓interpret information pertaining to security and surveillance systems found on drawings and specifications
• ✓identify types of security and surveillance systems, and describe their characteristics, applications and operation
• ✓identify and describe types of associated systems that are interconnected with security and surveillance systems
• ✓identify security and surveillance system components, and describe their characteristics and applications
• ✓identify considerations and requirements for selecting security and surveillance systems and components

Covers demonstrating knowledge of procedures to install, upgrade and connect security and surveillance systems and components.

• ✓identify tools and equipment used to install, upgrade and connect security and surveillance systems and components
• ✓describe procedures to install, upgrade and connect security and surveillance systems and components
• ✓describe procedures for testing security and surveillance systems and components
• ✓describe procedures for commissioning and verification of security and surveillance systems

Covers installation, servicing and maintenance of motor starters and motor control devices.

• ✓D-22.01 Installs motor starters
• ✓D-22.02 Performs servicing and maintenance of motor starters
• ✓D-22.03 Installs motor control devices
• ✓D-22.04 Performs servicing and maintenance of motor controls

Covers installation, servicing and maintenance of single-phase, three-phase and DC motors.

• ✓D-24.01 Installs single-phase motors
• ✓D-24.02 Performs servicing and maintenance of single-phase motors
• ✓D-24.03 Installs three-phase motors
• ✓D-24.04 Performs servicing and maintenance of three-phase motors
• ✓D-24.05 Installs DC motors
• ✓D-24.06 Performs servicing and maintenance of DC motors

Covers installation, servicing and maintenance of AC and DC drives.

• ✓D-23.01 Installs AC drives
• ✓D-23.02 Performs servicing and maintenance of AC drives
• ✓D-23.03 Installs DC drives
• ✓D-23.04 Performs servicing and maintenance of DC drives

Covers installation, servicing, maintenance, programming and configuration of automated control systems.

• ✓D-25.01 Installs automated control systems
• ✓D-25.02 Performs servicing and maintenance of automated control systems
• ✓D-25.03 Programs and configures automated control systems

Covers determining type, size and function of AC drive, calculating conductors, mounting, calibrating and programming, interconnecting peripherals, testing and removing existing drives.

• ✓determine type of AC drive
• ✓determine size and function of AC drive
• ✓calculate conductor and cable requirements
• ✓select tools and equipment
• ✓position, mount and assemble AC drives
• ✓terminate conductors and cables
• ✓calibrate and program AC drives
• ✓interconnect AC drives with peripheral devices
• ✓conduct tests after installation and record results
• ✓remove existing AC drives when replacing

Topic covers AC drives, their components, accessories, operating principles and procedures to install, connect and adjust them.

• ✓identify types of AC drives
• ✓identify AC drive components and accessories
• ✓interpret information on drawings and specifications
• ✓interpret codes and regulations
• ✓explain operating principles and impact on motor performance
• ✓identify considerations for selecting AC drives
• ✓identify tools and equipment to install and connect
• ✓describe procedures to install, connect and adjust

Covers diagnosing, removing, repairing, replacing components, adjusting programming, testing, cleaning and analyzing maintenance results.

• ✓obtain detailed description of operation and malfunction
• ✓select tools and equipment
• ✓determine source of malfunction
• ✓identify and remove defective components
• ✓repair malfunctioning components and verify repair
• ✓select and install replacement components
• ✓adjust programming after repair
• ✓conduct tests after repair
• ✓clean and adjust components
• ✓record tests in maintenance schedule
• ✓compare and analyze maintenance test results

Topic covers tools, equipment and procedures to service and maintain AC drives, components and accessories.

• ✓identify types of AC drives
• ✓identify AC drive components and accessories
• ✓interpret information on drawings and specifications
• ✓interpret codes and regulations
• ✓explain operating principles
• ✓identify tools and equipment to service and maintain
• ✓describe procedures to service and maintain

Covers determining type, size and function of DC drive, calculating conductors, mounting, calibrating and programming, interconnecting peripherals, testing and removing existing drives.

• ✓determine type of DC drive
• ✓determine size and function of DC drive
• ✓calculate conductor and cable requirements
• ✓select tools and equipment
• ✓position, mount and assemble DC drives
• ✓terminate conductors and cables
• ✓calibrate and program DC drives
• ✓interconnect DC drives with peripheral devices
• ✓conduct tests after installation and record results
• ✓remove existing DC drives when replacing

Topic covers DC drives, their components, accessories, operating principles and procedures to install, connect and adjust them.

• ✓identify types of DC drives
• ✓identify DC drive components and accessories
• ✓interpret information on drawings and specifications
• ✓interpret codes and regulations
• ✓explain operating principles and impact on motor performance
• ✓identify considerations for selecting DC drives
• ✓identify tools and equipment to install and connect
• ✓describe procedures to install, connect and adjust

Covers diagnosing, removing, repairing, replacing DC drive components, testing, cleaning and analyzing maintenance results.

• ✓obtain detailed description of operation and malfunction
• ✓select tools and equipment
• ✓determine source of malfunction
• ✓identify and remove defective DC drive components
• ✓repair malfunctioning DC drive components and verify repair
• ✓select and install replacement DC drive components
• ✓conduct tests after repair
• ✓clean and adjust DC drive components
• ✓record tests in maintenance schedule
• ✓compare and analyze maintenance test results

Topic covers tools, equipment and procedures to service and maintain DC drives, components and accessories.

• ✓identify types of DC drives
• ✓identify DC drive components and accessories
• ✓interpret information on drawings and specifications
• ✓interpret codes and regulations
• ✓explain operating principles
• ✓identify tools and equipment to service and maintain
• ✓describe procedures to service and maintain

Covers identifying equipment to energize/de-energize, testing conductors, verifying drawings, following startup/shutdown sequences and installing temporary grounds.

• ✓identify equipment that needs to be energized
• ✓identify equipment that needs to be de-energized
• ✓select tools and equipment
• ✓test cables and conductors
• ✓verify drawings match field wiring
• ✓verify connected components operate
• ✓follow specifications sequence for startup
• ✓follow specifications sequence for shutdown
• ✓check system peripherals for specified operation
• ✓install temporary protective ground equipment on shutdown and remove on startup
• ✓verify connections and terminations and torquing of bolts
• ✓inspect and remove shipping materials, tools, jumpers, debris, gravity pins, blocking and latching devices
• ✓notify required personnel of startup and shutdown procedures

Covers knowledge of the purpose of startup and shutdown procedures.

• ✓identify hazards, and describe safe work practices pertaining to starting up and shutting down systems or equipment
• ✓describe purpose of starting up and shutting down, and types of systems and equipment requiring it
• ✓identify and interpret information sources and documentation pertaining to starting up and shutting down of systems or equipment

Covers knowledge of procedures to start up and shut down systems or equipment.

• ✓identify tools and equipment used to start up and shut down systems or equipment, and describe their applications and procedures for use
• ✓describe startup and shutdown procedures for various types of systems and equipment

Covers setting operational parameters, confirming peripherals, operational checks, adjusting components and de-energizing/isolating equipment to zero energy state.

• ✓select tools and equipment
• ✓check documentation and nameplate data for operational parameters
• ✓confirm system peripherals are functional
• ✓perform operational checks
• ✓visually inspect system for problems
• ✓adjust components to achieve desired operation
• ✓isolate potential energy from equipment
• ✓identify and remove equipment feed from distribution source
• ✓collaborate with other trades to ensure all services are disconnected
• ✓confirm system is de-energized

Covers knowledge of commissioning and decommissioning and their purpose.

• ✓identify hazards and describe safe work practices pertaining to commissioning and decommissioning systems or equipment
• ✓identify purpose of commissioning and decommissioning, and types of systems and equipment requiring them
• ✓identify and interpret information sources and documentation pertaining to commissioning and decommissioning of systems or equipment
• ✓identify diagnostic and test equipment for purpose of commissioning and decommissioning systems

Covers knowledge of commissioning and decommissioning procedures.

• ✓describe commissioning and decommissioning procedures

Covers determining, laying out, mounting, terminating and removing lightning protection system components.

• ✓determine type of lightning protection system required
• ✓select and lay out lightning protection components
• ✓select tools and equipment
• ✓position and mount lightning protection components
• ✓terminate and interconnect lightning protection components
• ✓remove and dispose of existing components when replacing and update documentation

Covers purpose, types, codes, drawings and selection considerations for lightning protection systems.

• ✓explain purpose of lightning protection systems
• ✓identify lightning protection systems and describe their characteristics
• ✓interpret codes and regulations pertaining to lightning protection systems
• ✓interpret information found on drawings and specifications
• ✓identify considerations for selecting type of lightning protection systems

Covers tools, equipment and procedures to install lightning protection systems and components.

• ✓identify tools and equipment used to install lightning protection system
• ✓identify and describe procedures to install lightning protection systems and components

Covers the skills to select, route, measure, cut, bend, mount, support and remove conduit, tubing and fittings.

• ✓determine installation requirements and select conduit, tubing and fittings
• ✓select tools and equipment
• ✓determine routing of conduit and tubing
• ✓measure, cut, thread and bend conduit
• ✓measure, cut and bend tubing
• ✓assemble, position, mount and support conduit, tubing and fittings
• ✓determine requirements for removal of existing conduit, tubing and fittings
• ✓remove conduit, tubing and fittings when replacing, and update documentation

Covers knowledge of conduit, tubing and fitting types, components, characteristics, applications, codes and selection/removal considerations.

• ✓identify types of conduit, tubing and fittings, and describe their characteristics, applications and limitations
• ✓identify conduit, tubing and fitting components, and describe their characteristics and applications
• ✓identify tools and equipment related to conduit, tubing and fittings, and describe their applications and procedures for use
• ✓interpret information pertaining to conduit, tubing and fittings found on drawings and specifications
• ✓interpret codes and regulations pertaining to conduit, tubing and fittings
• ✓identify considerations and requirements for removal of conduit, tubing and fittings, and their components
• ✓identify considerations and requirements for selecting conduit, tubing and fittings, and their components

Covers knowledge of tools, equipment and procedures to remove, cut, thread, bend, install and support conduit and tubing systems.

• ✓identify tools and equipment used to remove or install conduit, tubing and fittings, and their components, and describe their applications and procedures for use
• ✓describe procedures used for removal of conduit and tubing
• ✓describe procedures to cut, thread (if applicable) and bend conduit and tubing
• ✓describe procedures to install and support conduit and tubing systems
• ✓describe procedures to select and install conduit and tubing related components

Covers obtaining and documenting a detailed description of operation and malfunction issues from end user.

Covers selecting tools and equipment according to the task.

Covers referencing as-built drawings and maintenance log and conducting a walkthrough to identify existing systems.

Covers programming and configuring the system per job and client requirements.

Covers performing sensory and technical inspections using diagnostic equipment and software.

Covers comparing test results to the security and surveillance log and client requirements.

Covers testing and verifying replacement security and surveillance system components.

Covers restoring component functionality so sensors and recording devices cover required area to optimal condition.

Covers producing clear, detailed documentation of systems and components tested and changed plus test and certification results.

Covers explaining system changes to the system monitor.

Covers demonstrating knowledge of security and surveillance systems, components, associated systems, characteristics, applications and operation.

• ✓interpret codes and regulations pertaining to security and surveillance systems
• ✓interpret information pertaining to security and surveillance systems found on drawings and specifications
• ✓identify types of security and surveillance systems, and describe their characteristics, applications and operation
• ✓identify security and surveillance system components, and describe their characteristics and applications
• ✓identify considerations and requirements for selecting security and surveillance systems and components
• ✓describe types of associated systems that often interconnect with security and surveillance systems

Covers demonstrating knowledge of procedures to service and maintain security and surveillance systems and components.

• ✓identify tools and equipment used to service and maintain security and surveillance systems and components
• ✓describe possible effects of service and maintenance of security and surveillance system on associated systems
• ✓describe procedures to service and maintain security and surveillance systems and components
• ✓describe procedures for testing security and surveillance systems, components and conductors
• ✓describe procedures for commissioning and verification of security and surveillance systems