1. When you approach this sign at an intersection, you must:
- A. Slow down, be prepared to stop, and give the right-of-way to traffic and pedestrians. ✓
- B. Come to a complete stop before the crosswalk or intersection.
- C. Merge into the traffic lane without stopping.
- D. Proceed with caution without slowing down.
According to the Texas Driver Handbook, a Yield sign means you must slow down and give the right-of-way to traffic on the road you are entering or crossing. You must be prepared to stop if necessary to let other drivers, pedestrians, or cyclists pass safely.
2. You are following a dump truck filled with gravel. The sides and tailgate are secure, but small rocks are blowing from the top of the pile. What is this driver legally required to do?
- A. Drive at a lower speed to reduce the amount of blowing material.
- B. Only fill the truck to 75% capacity.
- C. Firmly secure a cover, like a tarpaulin, over the top of the load. ✓
- D. Display a "Caution: Falling Debris" sign on the back of the truck.
According to Texas law, the top of a load of loose material must be covered with a canvas, tarpaulin, or other covering that is firmly secured to prevent the load from blowing or spilling.
3. When completing a left turn from a two-way street onto another two-way street with multiple lanes, which lane should you enter?
- A. The lane furthest to the right.
- B. Whichever lane is empty.
- C. The lane closest to the center line or median. ✓
- D. The lane you intend to use after the turn.
Rule 2 states that you should complete a left turn by entering the lane on the new road that will interfere the least with other traffic. This is the lane closest to the center line or median for your direction of travel.
4. When a driver reaches the physical point where the road intersects with railroad tracks, which specific sign marks this location?
- A. A round, yellow warning sign.
- B. A white, X-shaped sign (crossbuck). ✓
- C. A 'YIELD' sign.
- D. Pavement markings with an 'RR'.
A crossbuck sign, which is a white, X-shaped sign, is posted at the railroad crossing itself to mark the exact location of the tracks.
5. This sign indicates that:
- A. You cannot enter the street or roadway ahead. ✓
- B. You must come to a complete stop before proceeding.
- C. The lane is reserved for specific types of vehicles.
- D. A traffic circle or roundabout is ahead.
This is a 'Do Not Enter' sign. According to the Texas Driver Handbook, this sign warns you that you are going the wrong way on a one-way street, freeway ramp, or in a location where traffic is prohibited. You must not proceed past this sign.